A Step By Step Guide – To Use The Sharpening Stone For Sharpening The Knives

If you have dull knives that are no longer capable of doing their job, then you need to sharpen your knife with the help of Sharpening Stones. These are also called the whetstones, which are made of natural or synthetic materials. You can use these stones when they are dry, with oil, or even with water. At first, you have to choose the sharpening stones as per your need and requirement; then, you have to simply run the blades of the knives over the stone.

Hold on to the knife against the sharpening stone

The very first thing that you need to do is to hold the knife against Sharpening Stone. There are so many Sharpening Stones available in the market, so you can choose any of them as per your suitability. You should place the fingertips of your other hand on the flat part of the blade that is near the sharp end.

Sweep one side of the knife on the stone

Now it is the time when you have to slowly slide the blade down the stone. You have to draw the complete edge of the blade from the top to the bottom so that the knife is evenly sharpened. You should always wet the Sharpening Stones when it starts to feel dry.

Turn the knife to sharp another side

When you are done with sharpening one side of the knife, then you have to turn the knife to sharpen the other side of the knife. You should start sweeping it until the blade feels sharp when you touch it with your fingers. The one thing that you need to make sure of is that when you touch your skin with the knife, then you have to be very cautious.

By following these easy steps you can easily make use of the sharpening stone.